- máquinas de filtrado de aceite dieléctrico transformadores del termovacio de las etapas dobles
- equipo de tratamiento de aceite de transformadores de vacío montado en remolque móvil
- purificador de aceite lubricante (turbina / hidráulico)
- purificador de aceite del transformador del vacío de la sola etapa
- Sistema de purificación de aceite por deshidratación al vacío.
- purificador de aceite aislante
- máquina de filtro de aceite portátil
- purificador de aceite de tipo coalescente
- Separador centrífugo de aceite tipo disco
- Sistema de filtración de aceite diesel (combustible)
- máquina de filtro de prensa
- Equipo de Bomba de Vacío
- sistema de purificación de secado al aire
- equipos de prueba
- planta de tratamiento de gas sf6
- Tanques de filtración y accesorios
Acore Filtration Co. Ltd.
- Tel : +86 132 06063693
- Email : sales@acorefiltration.com
- móvil y whatsapp : +8613206063693
- Fax : +86 23 8132 4618
- Añadir : No.2, Jianhe Road, Banan District, Chongqing, China
Caso
VPS500(500M3/H) Vacuum Pump Machine Sales to Georgia
July 3,2025.
VPS500(500m3/h) Vacuum Pump Machine sales to Georgia, which is used for transformer vacuum evacuation. Transformer
vacuum pump machine is a key process equipment in power equipment
manufacturing, which is mainly used to remove moisture and gas from transformer
insulation materials to ensure its electrical insulation performance. The
following is explained from four aspects: working principle, core components,
technical points and brand selection:
The working principle and importance
In a vacuum (typically ≤ 133Pa), the boiling point of water is significantly
reduced. The vacuum pump unit continuously pumps air to form a negative
pressure inside the transformer body, and the moisture in the insulating
material evaporates at low temperatures and is discharged by the vacuum system.
Compared with atmospheric pressure drying, vacuum drying can avoid the damage
of high temperature to the insulating material, and the efficiency is increased
by more than 30%.
Transformer insulation materials (e.g. cardboard, pads) have an initial
moisture content of 4%-8%, while the operating standard requires ≤ 0.5% (0.3%
≤for 500kV class). Moisture will reduce dielectric strength and increase
dielectric loss, and vacuum drying is the core process to ensure the safety of
transformers.
The Core Composition of Vacuum Pump Unit
Backing pump: oil sealed rotary vane pump or dry screw pump is mostly used, which
can quickly establish rough vacuum.
Booster Pump: The roots pump is used in the medium vacuum stage, and in
combination with the molecular pump, it can achieve a high vacuum (10⁻² Pa) and completely remove
deep water.
Auxiliary systems Cold trap : captures water vapor to prevent it from entering
the vacuum pump;
On-line monitoring: vacuum sensor, dew point meter real-time monitoring of the drying process.